page 1 of 4 ac/dc power supplies tpi 100 series, 100 watt features highest power density open frame 100 w power supply in 2 x 3 package i/o reinforced isolation 3000 vdc ready to meet erp directive, < 0.3 w no load power consumption highest effciency 91 to 92% across 10% C 100% load range active power factor correction (>95) protection class ii prepared operating up to 5000 m altitude adjustable output voltage 3-year product warranty the tpi 100 series of 100 watt ac/dc power supplies features a 3000 vac i/o reinforced isolation. excellent effciency of up to 92% allows a high power density for the standard 2.0 x 3.0 packaging format. the full load operating tem - perature range is C40c to +50c while it goes up to 70c with 50% load derating. the power supplies are designed to meet the erp directive (< 0.3w no load power consumption). they come with an active power factor correction and the emc characteristic is dedicated for applications in industrial and domestic felds. high reliability is provided by use of industrial quality grade components and an excellent thermal management. it makes the products an ideal solution for any de - manding industrial devices and space critical applications. order code output voltage (adjustment range) output current max. effciency max. tpi 100-112a-j 12 vdc (10.8 - 13.2) 8.34 a 91 % tpi 100-115a-j 15 vdc (13.5 - 16.5) 6.67 a 92 % tpi 100-124a-j 24 vdc (21.6 - 26.4) 4.17 a 92 % tpi 100-136a-j 36 vdc (32.4 - 39.6) 2.78 a 91 % tpi 100-148a-j 48 vdc (43.2 - 52.8) 2.09 a 91 % models prepared c b scheme u l 60950 -1 http://www.tracopower.com
page 2 of 4 ac/dc power supplies tpi-100 series 100 watt input specifications input voltage range C ac range (universal input) 85 C 264 vac C dc range 120 C 370 vdc input frequency 47 C 63 hz input current at full load C at 115 vac / 230 vac 1.15 a max. / 0.55 a max. input protection t3.15 a/250 vac (internal fuse in both line & neutral) zero load power consumption 0.3 w (acc. erp directive) harmonic limits en 61000-3-2, class a & d C power factor 0.95 inrush current at 230vac 50 a max. output specifications voltage set accuracy 1 % regulation C input variation 0.2 % max. C load variation (0 - 100%) 0.5 % max. minimum load not required temperature coefficient 0.02 %/k hold-up time C vin = 115 vac / 230 vac 22 ms min. start-up time <1s rise time 20ms typ. output voltage adjustment 10 % ripple and noise (20mhz bandwidth) 12 vdc model: 120 mvp-p typ. with cap. 10f/25v 1206 x7r mlcc 15 vd c model: 150 mvp-p typ. with cap. 10f/25v 1206 x7r mlcc 24 vdc model: 160 mvp-p typ. with cap. 1f/50v 1206 x7r mlcc 36 vdc model: 190 mvp-p typ. with cap. 1f/50v 1206 x7r mlcc 48 vdc model: 340 mvp-p typ. with cap. 0.1f/100v 1206 x7r mlcc overvoltage protection 115 C 135 % of nominal vout overload protection by current limit (hiccup) at 115 C 150 % iout max. short circuit protection continuous (automatic recovery) transiente response C peak deviation 3 % of vout (25% load step change) C recovery time 500s general specifications operating temperature C40 c to +70 c with derating, see below start up at -40: 80% max. load at vin > 100 vac start up at -40: 100% max. load at vin > 200 vac output power derating C temperature 2.33 %/k above +50c C low input voltage 1.33 %/v below 100 vac storage temperature C40c to +85c humidity (non condensing) 5 C 95 % rel. h max. altitude during operation 5000 m switching frequency 60 khz typ. (pulse width modulation) isolation voltage 1min (reinforced insulation) C input / output 3000 vac C input / case 150 0 vac leakage current (at 264 vac/60hz) 300 a max. isolation resistance (at 500 vdc) 100 mohm min. reliability, calculated mtbf at +25c acc. to iec 61709 > 790000 h all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. http://www.tracopower.com
page 3 of 4 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. ac/dc power supplies tpi-100 series 100 watt general specifications protection class class ii prepared electromagnetic compatibility C conducted input ri suppression en 55022, class b (emc), emissions C harmonic current emissions iec / en 61000-3-2, class a & d C voltage flicker iec / en 61000-3-3, (class tba.) C radiated input surpression en 55011, class a electromagnets compatibility C electrostatic discharge esd iec / en 61000-4-2, 8kv/6kv perf. criteria a (emc), immunity C rf field immunity iec / en 61000-4-3, 20v/m perf. criteria a C electrical fast transients/burst immunity iec / en 61000-4-4, 2kv perf. criteria a C surge iec / en 61000-4-5, 1kv/ 2kv perf. criteria a C conducted rf iec / en 61000-4-6, 20 vr.m.s perf. criteria a C magnetic field iec / en 61000-4-8, 10a/m perf. criteria a C dip an interruptions iec / en 61000-4-11, (criteria tba.) safety standards C information technology equipment ul 60950-1, iec/en 60950-1 C certification documents www.tracopower.com/overview/tpi100 environment C vibration acc. iec 60068-2-6; 3 axis, sine sweep, 10C55hz, 1g, 1oct/min C shock acc. iec 60068-2-27 3 axis, 10g half sine, 11msshock 20 g (3 directions each 3 times) environmental compliance C reach www.tracopower.com/overview/tpi100 C rohs rohs directive 2011/65/eu connection pin connector 02 04 06 08 0 100 80 60 40 20 0 output power [%] ambient t emperature [c] (for horizontal mounting) -25 power derating depending on temperature http://www.tracopower.com
page 4 of 4 sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com rev. january 14. 2016 dimensions ac/dc power supplies tpi-100 series 100 watt dimensions in inch, () = mm tolerances: x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) wire dimensions range 26 - 16 awg customized versions on request (e.g. encased, screw terminal, din-rail clip) input output pin con 1 pin* con 2 1 line 1,2 C vout 3 neutral 3,4 + vout weight: 156 g (5.50oz) *connectors rated for 10 a max. (at higher current connection has to be splittet) pin connector j1: jst series mates with jst crimp terminal: bvh-21t-p1.1 and terminal housing: vhr-3n j2: jst series mates with jst crimp terminal: bvh-21t-p1.1 and terminal housing: vhr-4n
|
